Re-Enable Zone / Address (H2/B5) - Panasonic EBL512 Operating Instructions Manual

Panasonic Electric Works Fire & Security Technology Europe AB
MEW00748
24.5
Action
"Access"
Scroll to menu H2:
"A"
Scroll to menu B5.
"A"
"A"
Rev: 1

Re-enable zone / address (H2/B5)

Disabled alarm points, zone / addresses, are listed in menu H4/U1
from which it is also possible to get a print-out.
Re-enabling via this menu has higher priority than automatic re-
enabling.
When all alarm
"Disablements" (L8) will be turned OFF, if there are no other
disablements in the system.
Text in display
Disable or re-enable
Disable zone
Re-enable zone / address
Re-enable zone: 000 Address: 00
Re-enable zone / address
Operating Instructions Fire alarm system EBL512 V2.3.x
points have been
ACCEPT? H2
ACCEPT? B1
ACCEPT? B5
ACCEPT?
ACCEPT? B5
81
re-enabled, The LED
Comments
According to chapter
"Access", see page 72.
If there are no zone /
addresses to re-enable,
L
menu B4 will be shown
again.
L=a list in which you can
scroll.
If it's the correct zone /
address to re-enable, press
"A" to accept. If not, scroll
or write the wanted zone /
address and press "A" to
accept.
If more re-enablements
shall be done, continue like
above. If not, scroll or
press "Return" to menu
H2. Scroll or press
"Return" to log off.