Led; External Indicator (Led); Display / Lcd; Door Open / Key Switch - Panasonic EBL512 Operating Instructions Manual

Panasonic Electric Works Fire & Security Technology Europe AB
MEW00748 Rev: 1
2.14
2.15
2.16
2.17
2.18
2.19
Operating Instructions Fire alarm system EBL512 V2.3.x
Router or Repeater is the same type of unit (different configuration).
All network programming (configuration) are made with the PC
program "TLON Manager".

LED

LED (Light Emitting Diode) = Yellow, green or red optical indicator
("lamp").

External Indicator (LED)

A unit with an LED. Connected to an ASB, ADB, CDB or a detector
with a built-in LED. Lit when the built-in LED is lit.

Display / LCD

LCD (Liquid Crystal Display) = Display for presentation of fire
alarms, fault messages, etc. Normally alphanumeric characters and
backlight.

Door open / Key Switch

In most EBL512 configurations there is a door Switch which is
activated when the control unit door is opened.
configurations does a key Switch replace this door Switch.
The LED "Door open" is indicating "door open" / key Switch in
position "access".

SSD / Site Specific Data

This data is unique for each installation.
presentation numbers, user definable text messages, programmable
outputs, etc. are programmed (configured) in the PC program Win512
and has to be downloaded in EBL512.

S/W / Software / System program

The S/W makes the control unit (the microprocessor) work. It is
factory downloaded but a new version can be downloaded in EBL512
on site.
11
In some
All alarm points,