Table of Contents
Advertisement
8/64
Bosch Rexroth AG
Safety information
1.3.3
Abbreviations
This documentation uses the following abbreviations:
Abbreviation
Meaning
Agilus
6-axis Agilus industrial robot, type KR Sixx, Manufacturer: KUKA
Roboter GmbH
WS502 training
Robotics training system with WS502 robot
system
Tabelle 3: Abbreviations
2
Safety information
2.1
About this chapter
The product was manufactured in accordance with the generally recognized rules
of technology. However there remains the danger of personal injury and property
damage if you do not adhere to the safety information in this documentation.
Read this documentation thoroughly and in its entirety before you work with
the product.
Keep the documentation so that it is user-accessible at all times for all users.
Always pass the product on to third parties together with the required
documentation.
2.2
Appropriate use
The WS502 training system is a mechanical and electrical system.
It may only be used to impart the technical training and development knowledge
and skills in the sector of robotics as well as to control and feedback control
systems technology.
For the development of complete systems and simulations use only devices and
sets approved for the WS502 training system.
Operation is only permitted under the operating conditions stated in chapter 5.
The product is intended for professional use only and not for private use.
Proper use also includes that this documentation and in particular the "Safety
Information" chapter have fully read and understood.
2.3
Non-intended use
Any use other than the use described in intended use is not proper and therefore
impermissible.
If unsuitable products are installed or used in safety-relevant applications,
unintentional operating states can occur in the application which can cause
injuries/damage to persons and/or property. For that reason use a product in
safety-relevant applications only if such use is expressly stated and allowed in the
documentation of the product. For example in explosion-protection areas or in
safety-related parts of a control system (functional safety).
Bosch Rexroth AG assumes no liability for damage in the event of improper use.
The risks associated with non-intended use are the sole responsibility of the user.
Robotics Trainings System WS502
Advertisement
Table of Contents
