Display" Off Status; Machine" Off Status; Delay Start - Miele PDR 908 HP Operating And Installation Instructions

"Display" off status

The display switches off to save
energy; only the Start/Stop sensor
flashes slowly. This can be changed.
Changing this setting leads to increased
energy consumption.
- Off
Not switching off
- On (10 min.) Not curr.prog.
The display will remain on while the
programme is running but will go out
10 minutes after the end of the
programme.
- Logo (10 min.) Not curr.prog.
The display will remain on while the
programme is running but the logo
will light up 10 minutes after the end
of the programme.
- Factory setting: On after 10 min.
The display switches off after
10 minutes.
- On (30 min.) Not curr.prog.
The display will remain on while the
programme is running but will go out
30 minutes after the end of the
programme.
- Logo (30 min.) Not curr.prog.
The display will remain on while the
programme is running but the logo
lights up 30 minutes after the end of
the programme.
- On after 30 min.
The display will go out after
30 minutes.
Supervisor level

"Machine" off status

In order to save energy, the tumble
dryer will switch off automatically after
the end of the programme or if no
further selection is made. This can be
changed.
Changing this setting leads to increased
energy consumption.
- Not switching off
- Factory setting: Switching off after
15 minutes
- Switching off after 20 minutes
- Switching off after 30 minutes

Delay start

The delay start (Timer) can be
activated or deactivated.
- Factory setting: Off
- On
SmartStart (only available in selected
countries)
The function of Delay start changes
when the SmartGrid setting is
activated. The period of time in which
the drying programme will start
automatically is then shown in the
display: SmartStart by, SmartStart in,
or SmartFinish by.
The programme is started via an
external signal.
The time period can be defined up to
24 hours. During this period, the tumble
dryer waits for an external signal. If no
signal is sent during the defined period,
the tumble dryer starts the drying
programme once the defined period of
time has elapsed.
91