Sensors And Touch Display With Sensor Controls; Main Menu - Miele PDR 908 HP Operating And Installation Instructions

Sensors and touch display with
sensor controls
The ,  and Start/Stop sensors
and the sensor controls in the display
react to finger contact. Every touch of
the sensors is confirmed by a keypad
tone. You can adjust the volume of the
keypad tone or switch it off (see
"Supervisor level").
The control panel with the sensor
and the touch display can be
scratched by pointed or sharp
objects, e.g. pens.
Only touch the display with your
fingers.

Main menu

After switching on the tumble dryer, the
main menu will appear in the display.
You can access all important submenus
from the main menu.
Touch the  sensor at any time to
return to the main menu. Values that
have not yet been confirmed with the
OK sensor are not saved when you
return to the main menu.


Programmes
 
Favourites Supervisor
Help
Operating the tumble dryer
 Programmes
For selecting drying programmes.
 Favourites
For selecting one of 12 favourite drying
programmes which can be set up and
saved by the operator (see "Supervisor
level - Favourite programmes").
 Supervisor
You can alter the tumble dryer's
electronics to suit changing
requirements in the Supervisor level
(see "Supervisor level").
 Networking
If the tumble dryer is networked, the
 symbol indicates the signal strength
of the network (SSID) to which it is
connected. Touch the symbol to display
the name of the network.
Help
You can display help to assist you with
the operation of the tumble dryer.
11:02

21