End Of Programme - Unloading The Drum; At The End Of The Programme; Removing The Laundry; Observing Care Instructions - Miele PDR 908 HP Operating And Installation Instructions

Heat-pump tumble dryer
Table of Contents

Advertisement

6. End of programme - unloading the drum

At the end of the programme

The laundry is cooled down shortly
before the end of the programme. The
laundry can then be removed.
-
Finish
lights up.
If Anti-crease * has been selected,
the drum will rotate in intervals. This
reduces creasing if the laundry cannot
be removed straight away.
The anti-crease function is switched off
at the factory.
The tumble dryer switches off
automatically 15 minutes after the end
of the programme.
36

Removing the laundry

 Open the door.
 Make sure that you empty the drum
completely.
Items left in the dryer could be
damaged by overdrying when the
dryer is used the next time.
Always remove all items from the
drum.
 Switch the tumble dryer off.

Observing care instructions

This tumble dryer requires regular
maintenance, particularly if it is used
on a continuous basis.
Useful tip: See "Cleaning and care".
Read the section "Observing cleaning
intervals" first.

Advertisement

Table of Contents
loading

Table of Contents