Maintenance; Introduction; Recommended Maintenance; Required Tools And Supplies - GE T2100 Service Manual

Maintenance

Introduction

Recommended Maintenance

A regular equipment maintenance program helps prevent unnecessary equipment
and power failures and also reduces possible health hazards.
To help you establish a systematic maintenance routine, GE Healthcare recommends
that you periodically perform the maintenance and test procedures described in
this manual, including:
• User to perform daily:
• "Visual Inspection" on page 54
• "Exterior Cleaning" on page 54
• Recommended six-month routine maintenance checks and test procedures
performed by qualified technical personnel:
• "Walking Belt Tension Adjustment" on page 55
• "Walking Belt Tracking Adjustment" on page 55
• "Self-Calibration" on page 45
• Check the handles and tighten the fasteners.
• On a monthly basis test the emergency stop switch.
NOTE:
Unless you have an Equipment Maintenance Contract, GE Healthcare does not
in any manner assume the responsibility for performing the recommended
maintenance procedures. The sole responsibility rests with the individual or
institution using the equipment. GE Healthcare service personnel may, at their
discretion, follow the procedures provided in this manual during visits to the
equipment site.

Required Tools and Supplies

See "Required Tools and Supplies" on page 105
2021403-120F
for a complete list of tools.
T2100 Treadmill
4
53