Specifications; Gateway Unit Av-Lsg10 - Panasonic Live Production Suite Series Operating Manual

Specifications

Gateway Unit AV-LSG10

Power supply/Current consumed
<AC IN 1> AC ( ) 100 V to 240 V, 50 Hz/60 Hz, 1.5 A
<AC IN 2> AC ( ) 100 V to 240 V, 50 Hz/60 Hz, 1.5 A
Supports redundant power supply.
150 W
Power consumption
indicates safety information.
Video terminal
<SDI IN A 1> to <SDI IN A 4> terminals
<SDI IN B 1> to <SDI IN B 4> terminals
<SDI IN 1>, <SDI IN 2> terminals
<SDI OUT C 1> to <SDI OUT C 4> terminals
<SDI OUT 1>, <SDI OUT 2> terminals
<SFP28 1> to <SFP28 4> terminals
Signal formats
Signal processing
Synchronous terminal
<REF> terminal
Video delay time
Control terminal
<LAN1> terminal
<LAN2> terminal
Other
Ambient operating temperature
Humidity
Dimensions (W×H×D)
Mass
Chapter 10 Specifications — Specifications
Maximum of 10 lines
f Connectors: BNC×10
4K signal×10 lines
12G-SDI
Maximum of 6 lines
f Connectors: BNC×6
4K signal×6 lines
f ME1PGM, ME1PVW, ME1CLN, ME1KEYPVW, ME2PGM, ME2PVW, ME2CLN, ME2KEYPVW, DSKPGM1,
DSKPVW1, DSKEXT1-1, DSKEXT1-2, DSKPGM2, DSKPVW2, DSKEXT2-1, DSKEXT2-2, MV1, MV2, and
AUX1 to AUX16 can be assigned.
f Connectors: SFP28
Used for connecting the XPT Unit.
f Mellanox: Use MCP2M00-A001E30N.
During 4K mode: 2160/59.94p, 2160/50p
During Standard mode: 1080/59.94p, 1080/50p, 1080/59.94i, 1080/50i
Y: P : P
B R
In Genlock mode: Black burst or Tri-level Sync input signals (with loop-through)
f If the loop-through output is not used, provide a 75 Ω termination.
f Connector: BNC
f Same field frequencies as those of the system formats supported
The REF terminals cannot be used. Do not connect a cable.
2 lines (H)
1 frame (F)
f A delay is applied when via Resizer, DVE, or MultiView.
Compatible with 1000BASE-T and AUTO-MDIX (For IP control)
f Connection cable: LAN cable (CAT5E), max. 100 m (328 ft), STP (Shielded Twisted Pair cable recommended)
f Connector: RJ-45
For a future expansion feature.
Do not connect a cable.
0 °C to 40 °C (32 °F to 104 °F)
10% to 90% (no condensation)
432 mm×44 mm×402 mm (17 inches×1-23/32 inches×15-13/16 inches) (excluding protrusions)
Approx. 6.4 k] (14.1 lbs.)
– 146 –
12G serial digital, SMPTE2082 standard compliant (video signal only)
f 11.88/1.001 Gbps
12G serial digital, SMPTE2082 standard compliant (video signal only)
f 11.88/1.001 Gbps
4: 2: 2 10 bit
When the frame synchronizer is set to [Off]
When the frame synchronizer is set to [On]