Page 1
Model No. This manual is an excerpted version of the Operating Guide. For more information, please visit the Panasonic website (http://pro-av.panasonic.net/en/manual/index.html), and refer to the Operating Guide (PDF). Before operating this product, please read the instructions carefully and save this manual for future use.
Read this first! Read this first! indicates safety information. WARNING: Installation should only be performed by qualified installation personnel. Improper installation may result in the entire apparatus falling down and causing injury. CAUTION: WARNING: Do not remove panel covers by unscrewing. •...
Page 3
Read this first! IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Page 4
3. Change the connection method used for the apparatus. 4. Connect the apparatus to another power outlet where the power is not shared by any other appliances. Manufactured by: Panasonic Corporation, Osaka, Japan Importer’s name and address of pursuant to EU rules:...
Page 5
Read this first! Declaration of Conformity with the requirements of Technical Regulation on the Restriction Of the use of certain Hazardous Substances in Electrical and Electronic Equipment (adopted by Order №1057 of Cabinet of Ministers of Ukraine) The Product is in conformity with the requirements of Technical Regulation on the Restriction Of the use of certain Hazardous Substances in electrical and electronic equipment (TR on RoHS).
The model numbers of the Main Frames AV-HS60U1P/AV-HS60U2P, AV-HS60U1E/AV-HS60U2E are described as “AV-HS60U1”/“AV-HS60U2”. f The model numbers of the Control Panels AV-HS60C1P/AV-HS60C2P, AV-HS60C1E/AV-HS60C2E are described as “AV-HS60C1”/“AV-HS60C2”. f The model number of the Menu Panel AV-HS60C3G is described as “AV-HS60C3”.
Overview Overview Overview AV-HS60C3 is the Menu Panel AV-HS60C3 which configures the switcher system of AV-HS6000. Connect to AV-HS60C1/AV-HS60C2 and configure various settings. For detailed operations, refer to the Operating Guide of the AV-HS6000 series. Ratings display The name, model number, and electrical ratings of the unit are indicated on its rear panel. Installation Refer to the Operating Guide of the AV-HS6000 series.
Part Names and Functions Part Names and Functions Operation panel 1 Top menu buttons (<ME1>, <ME2>, <DSK MISC>, <SYS>, <IN OUT>, <MV>, <PLUG IN>, <MEM>, <PRJ>, <CONF>) Selects the first hierarchy of the menu. 2 Split-screen buttons (<MENU MODE>, <WFM VECT>) Switches the display of the menu screen.
Part Names and Functions Display position Display content Upper left Images selected in the DISP bus are displayed. Upper right The WFM (waveform monitor) or VECTOR (vectorscope) for the video selected in the DISP bus is displayed. Bottom The menu will be displayed. 2 <WFM VECT>...
Specifications Specifications Power supply DC 12 V/0.54 A * Supplied from AV-HS60C1/AV-HS60C2 using the supplied cable Power consumption 6.48 W indicates safety information. <CONTROL PANEL> terminal Used only for the Control Panel AV-HS60C1/AV-HS60C2 f Connector: DVI-D f Because an independent signal format is used, DVI-D source cannot be displayed. f Cannot be used concurrently with a DVI-D monitor connected to the <DVI-D>...