Table of Contents
Advertisement
Installation
CAUTION:
These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that
contained in the operating instructions unless you are qualified to do so.
indicates safety information.
Installation of the different units
When installing or connecting the unit, be sure to ask your dealer.
r Connecting the power supply
f Use the units in the Live Production Suite series with both of the power supply 1 and power supply 2 operating on each of them.
An alarm is displayed when there is no AC power input to the power supply 1 and the power supply 2.
r Handle carefully.
f Dropping the unit or subjecting it to strong impact or vibration may cause trouble and/or malfunctioning.
r Do not allow any foreign objects to enter inside the unit.
f Allowing water, metal items, scraps of food or other foreign objects inside the unit may cause a fire and/or electric shocks.
r Choosing the best installation location
f This unit is a device for indoor use only.
f Securely mount the unit on the 19-inch standard rack that complies with the EIA standards (overall depth: 600 mm (23-5/8 inches) or more).
f Attach the rack mount fittings (supplied) using the 3 mount fitting screws (supplied) (for each side).
f Be sure to attach the "Rear panel support fitting" rack mount (supplied) that supports the rear of the unit.
Select 4 places (on each side) suited to the depth of the rack to secure the unit to the rack with screws.
(Prepare support fittings appropriate for the rack if the supplied fittings cannot be attached.)
Chapter 2 Installation and Connection — Installation
Rack mount fittings
Mount fitting screws
– 12 –
Rear panel support fittings
Rear panel support screws
Advertisement
Table of Contents
