Panasonic LP-310 Operation Manual page 116

(1) Marking shape and character setting
The character setting items are varied depending on the selected marking shape. Here describes the
character conditions to be set for each marking shape.
1. Straight Line
Marking Starting
Position
印字開始位置
Line Interval
行間隔
Item
1. Character Height
2. Character Width
3. X/Y Position
4. Character Interval
5. Line Interval
116
Character
Width
文字幅
Character Height: H
文字高さ：Ｈ
ｙ
１
ｙ＝ Ｈ
５
Character
文字間隔
Interval
1
2
3
4
5
Sets the character height.
Sets the character width.
Moves the marking start position of the character string
in the X direction for the X position setting and in the Y
direction for the Y position setting.
Sets the pitch between one character and another
character.
Sets the interval between one line and another line.
Y Axis
Ｙ軸
Description
Ｘ軸 X Axis
Center
中心
Edit Area
編集領域
Setting Range
0.20 to 50.00mm
(Step: 0.01mm)
0.20 to 50.00mm
(Step: 0.01mm)
+/-25.00mm
(Step: 0.01mm)
0.00 to 25.00mm
(Step: 0.01mm)
0.00 to 25.00mm
(Step: 0.01mm)