Drying Assistance - Miele PG 8581 Operating Instructions Manual

Drying assistance The additional "Drying Assistance" function accelerates the drying
Wash chamber
cooldown phase
process at the end of the program.
If drying assistance has been activated, the door will automatically
open a bit at the end of the program to release steam from the
cabinet. The load is then dried using passive heat given off by the
residual heat in the cabinet.
A cooldown pause follows the wash phase. During this pause, water
vapor is extracted from the wash chamber and condensed by the
steam condenser. This reduces the moisture level in the wash
chamber, which promotes drying. In addition, this cools the wash
chamber slightly.
...
 Cabinet cooling down time
The setting value is entered in increments of 1 minute. The possible
range is shown in the bottom line of the display.
Use the arrow buttons  (higher) and  (lower) to set the cooling

down duration.
Press OK to save the setting.

Cabinet cooling time
0 Min
(0 - 30 Min)
Program settings
91