Electrical connection
Peak-load
management
128
Peak-load cut-out
The machine is suitable for use in an energy management system. For
this purpose, it must be technically adapted and the controls reset by
Miele Technical Service.
Please contact Miele Technical Service for further information.
In the event of a peak load cut-out, some machine components such
as the heater element will be switched off for a while. The machine
will remain on during this period and the current program will not be
interrupted. If one of the components that is switched off is needed
during the current program stage, the program duration will simply
increase for the duration of the load cut-out.
The third line of the display will alert you of the peak load cut-out for
example:
Vario TD Dental
Temperature
55 °C
Peak load cut-out