Setting The External Output Resolution - Panasonic AG-UMR20P Operating Instructions Manual

Memory card portable recorder
Hide thumbs Also See for AG-UMR20P:
Table of Contents

Advertisement

Setting the external output resolution

Change the setting for outputting images to an external monitor or other external device (recorder, etc.).
1
Select the [OUTPUT SEL] menu.
: [OUTPUT SETUP] # [OUTPUT SEL] # desired setting
[SDI+HDMI]:
[SDI]:
[HDMI]:
2
Select the [RESOLUTION] menu.
: [OUTPUT SETUP] # [RESOLUTION] # desired setting
(In Recording Mode)
[1080p]/[1080i]/[720p]/[DOWN CONV.]
(In Playback Mode)
[SYSTEM]/[1080p]/[1080i]/[DOWN CONV.]
≥ (In case of Playback Mode)
[SYSTEM] automatically sets the output resolution according to the setting in [REC FORMAT].
If the images are not output on the external device when the setting is [SYSTEM], switch to the method [1080p],
[1080i], or [DOWN CONV.] which enables the images to be displayed on your external device. (Please read the
operating instructions for the external device.)
≥ [DOWN CONV.] outputs images in standard picture quality.
≥ The setup of [RESOLUTION] is reflected only to the external output of the HDMI OUT terminal when
[SDI MODE SEL] is set to [THROUGH].
≥ Images may not be displayed on the external device for several seconds in some cases, such as when changing
between clips.
≥ It may not be possible to change the setup of [RESOLUTION] depending on the combination of the recording format
type and [OUTPUT SEL].
≥ If the setup value of [RESOLUTION] is an item that cannot be set when [OUTPUT SEL] or [SDI MODE SEL] is
changed, [RESOLUTION] will automatically switch to the setup value matching the input signal.
(During CAM Mode)
j When the recording format is set to anything other than 720/59.94p or 720/50.00p:
1080/59.94i or 1080/50.00i
j When the recording format is set to 720/59.94p or 720/50.00p:
720/59.94p or 720/50.00p
(During SDI Mode)
j It will switch to 1080/59.94p or 1080/50.00p, 1080/59.94i or 1080/50.00i, or 720/59.94p or 720/50.00p in
accordance with the input signal.
Set this when outputting to both the SDI OUT terminal and the HDMI OUT terminal.
Set this when outputting to the SDI OUT terminal.
Set this when outputting to the HDMI OUT terminal.
- 96 -

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ag-umr20e

Table of Contents