Table of Contents
Advertisement
∫ Network security
As you will use the unit connected to a network, your
attention is called to the following security risks.
1 Leakage or theft of information through the unit
2 Use of the unit for illegal operations by persons with
malicious intent
3 Interference with or stoppage of the unit by persons
with malicious intent
It is your responsibility to take precautions such as those
described below to protect yourself against the above
network security risks.
≥ Use the unit in a network secured by a firewall, etc.
≥ If the unit is connected to a network that includes
personal computers, make sure that the system is not
infected by computer viruses or other malicious
entities (using a regularly updated antivirus program,
anti-spyware program, etc.).
≥ Protect your network against unauthorized access by
setting up user authentication to restrict users to those
who log in with an authorized user name and
password. In addition, to prevent third parties from
identifying user name information (including
passwords), register new user name information and
delete the default user name information. For details,
refer to "User authentication" on page 130.
≥ After accessing the unit as an administrator, be sure to
close all web browsers.
≥ Store authentication information (user names and
passwords) appropriately so that no third parties will
be able to access it.
≥ Change the administrator password periodically.
≥ Restrict access to the unit by authenticating the users,
for example, to prevent setting information stored on
the unit from leaking over the network.
≥ Do not install the camera in locations where the
camera or the cables can be destroyed or damaged by
persons with malicious intent.
≥ Avoid connections that use public lines.
≥ Concerning user authorization
User authentication on the unit can be performed via
digest authentication or basic authentication. If basic
authentication is used without using a dedicated line
equipped with an authentication function, password leaks
may occur.
≥ Usage restrictions
Use of the same segment is recommended for the
network in which the unit and the controller or personal
computer are connected.
If the equipment uses connections with different
segments, events based on the settings inherent to the
network equipment, for instance, may occur so check
this thoroughly prior to operation.
∫ About security
Be careful about the possibility of theft or loss of the unit,
and be careful not to leave the unit unattended. Please
note that Panasonic does not accept any responsibility
for the compromise, manipulation, and loss of
information caused by these events.
∫ Caution regarding laser beams
The lens may suffer damage if struck by a laser beam.
Make sure that laser beams do not strike the lens when
shooting in an environment where laser devices are
used.
∫ Cards that you can use with this unit
SDHC Memory Card and SDXC Memory Card
≥ 4 GB or more Memory Cards that do not have the
SDHC logo or 48 GB or more Memory Cards that do
not have the SDXC logo are not based on SD Memory
Card Specifications.
≥ Refer to page
27
- 13 -
for more details on SD cards.
Advertisement
Table of Contents
