Table of Contents
Advertisement
Recording
Useful functions
Using the SHIFT button
Useful recording and shooting functions can be used by pressing designated buttons while pressing and holding the
SHIFT button.
≥ Operation is not possible when the menu screen is displayed, except for the operation of turning on/off the LCD
monitor.
Perform the operation after closing the menu screen.
Buttons pressed at the same
time as the SHIFT button
AUDIO MON/ADV j button
AUDIO MON/ADV i button
SET button (press and hold)
(short press)
(press and hold)
USER1 button
Lock or clear button operations
The operation buttons can be disabled temporarily to prevent accidental operation.
Press and hold the SET button for 2 seconds or longer while pressing and holding the SHIFT
button.
≥ All the button operations become disabled.
≥ This is canceled by pressing and holding again for 2 seconds or longer.
≥ The lock setup is canceled when the unit is turned off.
≥
(yellow) is displayed in the LCD monitor while the operations are locked.
≥ The following operations are enabled even while the operations are locked.
j Recording and zoom operation with the wired remote control (optional) connected to the CAM REMOTE terminal.
j Operation from the Web screen of the remote camera controller, PC, or mobile terminal connected via network.
Function
Reduces the input level of audio
Increases the input level of audio
Lock the button operations or cancel the setting
Display the focus assist
Display the wave form
(l
Using the PUSH AUTO function
Perform Auto White Balance
Perform both the Auto Black Balance/Auto
White Balance
(l
53)
Switching on/off of the LCD monitor
- 76 -
(l
61)
(l
61)
(l
51)
77)
(l
50)
(l
53)
Usable modes
CAM Mode
SDI Mode
±
±
±
±
±
±
±
s
±
±
±
s
±
s
±
s
±
±
Advertisement
Table of Contents
