Table of Contents
Advertisement
Setting the User Information
Eight digit hexadecimal alphanumeric can be entered and displayed as a memo information such as dates, control
numbers, etc., into the User Information.
UB 00 00 00 00
≥ This is displayed only when [PRIORITY MODE] is set to [REC/PB] or [IP].
[UB PRESET]
You can set the User Information.
≥ Set [PRIORITY MODE] to [REC/PB] or [IP].
1
Select the menu.
: [TC/UB SETUP] # [UB PRESET]
2
Touch the item to set and change with
≥ You can use numbers from 0 to 9 and letters from A to F.
≥ It will be set to "00 00 00 00" when [Reset] is touched.
3
Touch [EXIT] to complete the setting.
≥ When [PRIORITY MODE] is set to [IP(4K)] or [REC/PB(4K)], the [UB PRESET] setting can be changed, but the
changed setting cannot be used.
Setting the Recording Counter
Recording Counter will display the recording time in seconds.
0:00:00 (hour : minute : second (When [REC COUNTER] is set to [TOTAL]))
CLP 0:00:00 (hour : minute : second (When [REC COUNTER] is set to [CLIP]))
[REC COUNTER]
Select the counting method during the recording.
Select the menu.
: [DISP SETUP] # [REC COUNTER] # desired setting
[TOTAL]:
[CLIP]:
To reset the Recording Counter for the Recording Mode
Recording counter will be set to "0:00:00" when the USER button assigned as <RESET> is pressed or the USER icon
is touched while displaying the counter.
≥ Please refer to page
65
(l
The count continues to increase until the Recording Counter is reset.
Resets the Recording Counter at start of recording. Counts the time of each recording
session.
for details about setting the USER button.
32)
/
.
- 64 -
(l
32)
Advertisement
Table of Contents
