Lcd Keypad Display - LG SV-iS5 Instruction Manual

Variable frequency drives
Hide thumbs Also See for SV-iS5:
Table of Contents

Advertisement

2.2.1

LCD Keypad Display

Displays
1) Parameter Group
2) Run/Stop Source
3) Frequency Setting
Source
4) Output Current
5) Parameter Code
6) Operating Status
7) Drive Output Frequency
Command Frequency
Morek IT OÜ, Rauna 24, 76506 Saue Harjumaa, Estonia. www.morek.eu Tel. +372 604 1423 Fax +372 604 1447 morek@morek.eu
2) Run/Stop Source
1) Parameter group
DRV
T/K
00 STP
5) Parameter Code
6) Operating Status
Displays the parameter group. There are DRV, FU1, FU2, I/O, EXT, COM, APP groups.
Displays the source of motor Run and Stop
K: Run/Stop using FWD, REV buttons on keypad
T: Run/Stop using control terminal input FX, RX
O: Run/Stop via option board
Displays the source of command frequency setting
K: Frequency setting using keypad
V: Frequency setting using V1 (0 ~10V) or V1 + I terminal
I: Frequency setting using I (4 ~ 20mA) terminal
U: Up terminal input when Up/Down operation is selected
D: Down terminal input when Up/Down operation is selected
S: Stop status when Up/Down operation is selected
O: Frequency setting via Option board
X: Frequency setting via Sub board
J: Jog terminal input
1 ~ 8: Step frequency operation
* During Auto operation, 2) and 3) display the ' sequence number/step' .
Displays the Output Current during operation.
Displays t h e code of a group. Use the ? (Up), ? (Down) key to move through 0~99 codes.
Displays the operation information.
STP: Stop Status
FWD: During Forward operation
REV: During Reverse operation
DCB: During DC Braking
LOP: Loss of Reference from Option Board (DPRAM fault)
LOR: Loss of Reference from Option Board (Communication network fault)
LOV: Loss of Analog Frequency Reference (V1: 0~10V)
LOI: Loss of Analog Frequency Reference (I: 4~20mA)
LOS: Loss of Reference from Sub-Board
Displays the Output Frequency during run.
Displays the Command Frequency during stop.
3) Frequency Setting Source
4) Output Current
0.0 A
0.00 Hz
7) Drive Output Frequency During Run,
Command Frequency During Stop
Description
25
Chapter 2 - Operation

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents