Load Photo Paper - Brother DCP-J562DW Basic User's Manual

IMPORTANT
• Be careful not to push the paper in too far;
it may lift at the back of the tray and cause
paper feed problems.
• Loading more than 20 sheets of Photo 2L
(13 x 18 cm) paper may cause paper jams.
To add paper before the tray is empty,
remove the paper from the tray and
combine it with the paper you are adding.
Always fan the stack of paper well to
prevent the machine from feeding multiple
pages.
6
Gently adjust the paper width guides (1)
to fit the paper.
Make sure the paper guides touch the
edges of the paper.
1
1
7
Close the output paper tray cover.
Slowly push the paper tray completely
into the machine.
8
While holding the paper tray in the
machine, pull out the paper support (1)
until it locks into place, and then unfold
the paper support flap (2).

Load Photo Paper

Use the photo paper tray which is located on
the top of the output paper tray cover, to print
on Photo (10 x 15 cm) or Photo L (89 x 127
mm) size paper.
1
Press the blue photo paper tray release
button (1) and slide the output paper
tray cover forward until it locks into the
photo printing position (2).
2
2
1
1
8