Advertisement
Quick Links
IMPORTANT SAFETY
®
INSTRUCTIONS
When using electrical appliances, especially
basic precautions should always be followed,
including the following:
17
READ ALL INSTRUCTIONS
BEFORE USING
KEEP AWAY FROM WATER
DANGER
PIECE
—Any appliance is
electrically live, even when the switch is off.
Haircut kit
To reduce the risk of electric shock:
1. Do not reach for an appliance that has
fallen into water. Unplug immediately.
2. Do not use while bathing or in the shower.
3. Do not place or store appliance where it
can fall or be pulled into a tub or sink. Do not
place in or drop into water or other liquid.
4. Always unplug this appliance from the
electrical outlet immediately after using.
5. Unplug this appliance before cleaning.
DO NOT REACH
INTO THE WATER
WARNING
—To reduce the risk
of burns, electric shock, fire, or injury to
persons:
1. The appliance should never be left
Instructions for
unattended when plugged in.
Care and Use
2. Close supervision is necessary when this
appliance is used by, on, or near children or
MODEL HC117WCSC
the disabled.
Advertisement
Related Manuals for Conair 17 PIECE HC117WCSC
Summary of Contents for Conair 17 PIECE HC117WCSC
- Page 1 1. The appliance should never be left Instructions for unattended when plugged in. Care and Use 2. Close supervision is necessary when this appliance is used by, on, or near children or MODEL HC117WCSC the disabled.
- Page 2 THE CONAIR GUIDE TO CUTTING HAIR AT HOME Attach combs by Before you start: holding them teeth 1. Inspect your clipper. Make sure it’s up, then snapping free of hair and dirt, properly oiled, and onto the bottom of running smoothly.
-
Page 3: User Maintenance Instructions
Cutter Wipe excess oil off with a soft dry cloth. (small blade) ® Conair hair clippers are carefully *The top edge of the cutting comb should inspected to insure that the blades are in be 1/32” to 1/16” (.79 mm. to 1.59 mm.) perfect alignment. - Page 4 Because a different cutting edge is used in Bottom each setting, the taper lever lengthens the Blade life of your blades. Blade Packed-in hair can slow down any clipper. To remove hair without removing the blades, use your cleaning brush to brush hair out of the blades.
- Page 5 8. Do not use outdoors or operate where ® aerosol (spray) products are being used or Your new Conair haircut kit has everything where oxygen is being administered. you need to achieve professional haircuts at home.
- Page 6 and the sideburns, hold the clipper upside If you want hair to be down (see Fig. 1) and, holding it against even shorter: the skin at the length desired, move the A ) A p p l y m o r e pressure to the head Fig.
- Page 7 This is the SPECIAL OIL maximum power setting. FIG. 4 ® To maintain the blades of your Conair FIG. 4 clipper, oil them after every three or four haircuts. Gently place a few drops of oil on the teeth of the blades, using the special ®...
-
Page 8: Two Year Limited Warranty
TWO YEAR LIMITED WARRANTY WARNING: Conair will repair or replace (at our option) your IF YOU THINK unit free of charge for 24 months from the date of purchase if the appliance is defective in THE POWER IS OFF workmanship or materials.
Need help?
Do you have a question about the 17 PIECE HC117WCSC and is the answer not in the manual?
Questions and answers
What is the power screw
The power screw allows you to adjust the power of the Conair 17 PIECE HC117WCSC clipper. It may need adjustment if the power in your house is low.
This answer is automatically generated