Using Your Headphones; Troubleshooting; New & Improved Charging Feature - Sharper Image 203787 Quick Start Manual

New & Improved Charging Feature
Note: This new and improved model features a redesigned charging base with an additional
charging cable. Should you ever experience any difficulties charging the headphones through
the primary method (resting them on the base), you may instead charge your headphones by
plugging this thin black wire into the small round port on the back of the left earcup. Either
way, your headphones will be charged and ready for daily use.

USING YOUR HEADPHONES

• Turn on the TV. The base should now detect audio coming from of the TV. When the base detects
sound coming from the TV, the blue "Level" light will illuminate.
• Next, switch on the Headphones. Slide the on/off switch under the right earcup to the on position.
Place the headphones on your head. Adjust the volume by turning the rotary volume wheel located
next to the on/off switch under the right earcup. You should now be able to hear sound from your TV.
Important: On some newer TV sets, it may be necessary to turn on or increase the volume of the headphone
jack the audio out jack. Consult the instruction manual of your TV to adjust these settings.
• To conserve battery power, turn the headphones off when not in use. Return to base for charging.

TROUBLESHOOTING

If you hear distorted sound or no sound in your headphones, try these steps:
• Be sure the base is connected to the TV according to the instructions above.
• Be sure the unit is fully charged. Remember, when the headphones are fully charged,
the red light will be unlit.
• Turn on the TV. If the base detects an audio signal, the blue Level light will illuminate.
• Turn on the headphones using the On/Off switch on the right earcup.
• Increase the headphone volume by turning the rotary Volume knob on the right earcup.
• Press the Tune button on the headphones or on the base. The TV Wireless Headphones transmit using
three different frequencies. Pressing the Tune button will help you find the strongest wireless signal.
• If you are connected to the TV via the headphone jack, make sure the headphone jack is turned on
and that the output level is turned up. (Normally, you can check this by pressing the Menu button on
your TV remote control and entering the Set-Up menu. Consult your TV owner's manual for details.)
• If you are connected to the TV via the audio out jacks, make sure the audio out jacks are turned on
and that the output level is turned up. (Normally, you can check this by pressing the Menu button on
your TV remote control and entering the Set-Up menu. Consult your TV owner's manual for details.)
• If you are still not getting any sound, try the alternate cable connection method using the other
included audio cable.
CUSTOMER SERVICE
If you require any additional assistance with your TV Wireless Headphones please call 1 (877) 210-3449.