Page 1
Item No. 204919 User Manual Thank you for purchasing TV Wireless Headphones from Sharper Image. This new and improved model is easy to set up, easy to use and even easier to charge than before. These 2.4GHz digital wireless headphones utilize the latest technology, so you can enjoy your favorite TV programs, day or night, without disturbing others.
NOTE: This device must be used with the AC adapter supplied in the package. If your AC adapter is lost or damaged, please contact Sharper Image Customer Service. Do not use any other AC adapters or power cords. - 2 -...
Page 3
INSTALLING THE BASE UNIT [ CONT. ] • If your TV has a headphone jack, use the RCA-to-3.5mm cable. Plug the 3.5mm side (the single black wire) into the TV headphone jack. Plug the red and white RCA plugs into the Audio In jacks on the back of the Base Unit.
OPEATING YOUR TV WIRELESS HEADPHONES [ CONT. ] • Turn on the Headphones by pressing the Power On/Off button for 2 seconds. • The Power/Signal LED on the Headphones will light up in RED, and then change to GREEN when an audio signal link between the Base Unit and the Headphones is established.
LINKING A SECOND PAIR OF HEADPHONES TO THE SAME BASE UNIT • Install Headphone batteries as described above. • Turn off the Base Unit. • With the Base Unit powered OFF, press and hold the Power button on the Headphones for about 10 seconds until the GREEN LED starts to blink.
TROUBLESHOOTING GUIDE Problem Possible Solution No sound coming from Headphones. • Ensure the AC/DC adaptor is properly plugged into the Base Unit and a working AC outlet. • Ensure the the Power Button at the back of the Transmitter is switched ON. •...
Page 7
TROUBLESHOOTING GUIDE [ CONT. ] Problem [Cont.] Possible Solution [Cont.] level of the headphone jack or the Audio Sound is distorted, staticky or hissy. Out jacks. Normally, you can check this by pressing the Menu button on your TV remote control and entering the Settings or Set Up menu.