Maxtor MaxAttach NAS 6000 Quick Start Card page 2

Documentation:
n
Quick Start Card
n
MaxAttach NAS 6000 End User License Agreement (EULA)
n
MaxAttach NAS 6000 Release Notes
n
MaxAttach NAS 6000 Installation and Documentation CD containing:
n
MaxNeighborhood Discovery and Setup Wizard application
n
MaxAttach NAS 6000 Documentation
n
Standalone O/S Help Files
1: Unit Information
Please record the following information from your system:
n
Model Number:_______________________________
n
Serial Number:________________________________
2: Installation Requirements
Client Workstation
n
Microsoft Windows O/S 95, 98, Me, NT (SP5), or 2000
n
Internet Explorer version 5.01 or higher; version 5.5 or higher recommended
n
10/100 Mbps Ethernet NIC card
n
Client for Microsoft Networks enabled over TCP/IP
n
CD-ROM drive
User Supplied Equipment
n
All systems: two CAT-5 and/or one Fiber Connection NIC cable/s
n
Rack-mount systems only: standard 19" rack with at least 4U space, two AC
power strips
3: Installation
Rack Mount Systems Only:
1. Mount in rack with provided hardware.
2. Install two power supply cords and
connect to power strips.
3. Install EMU cable between CPU I/O
Panel and EMU port as shown at right.
All Systems:
4. Connect the MaxAttach to your network using at least one NIC cable.
5. Make sure back panel switches are both "OFF" or "0" position. Route AC
power strip cords to AC power source.
Revision 2.0.03A 2 000001576