Do you have a question about the TO6A and is the answer not in the manual?
Questions and answers
Graham Luck
January 17, 2025
How do you remove upper oven to replace the upper grill element
1 comments:
Mr. Anderson
February 3, 2025
To remove the upper oven of a Kleenmaid TO6A for replacing the upper grill element, follow these steps:
1. Disconnect Power: Turn off the oven at the main power supply or unplug it to ensure safety.
2. Remove the Oven Door: Open the oven door fully, locate the hinges, and release the locking tabs. Lift the door gently to remove it.
3. Remove Internal Components: Take out any racks, trays, or other removable components from the oven.
4. Access the Grill Element: Locate the screws or clips securing the upper grill element inside the oven cavity. These are usually at the back or sides.
5. Disconnect the Element: Carefully unscrew or unclip the grill element. Pull it forward slightly to access the electrical connections. Note the wiring to ensure correct reassembly, then disconnect the wires.
6. Remove the Upper Oven (if required): If the upper oven needs removal for better access: - Locate the screws securing the upper oven to the cabinet or support brackets. - Unscrew and carefully pull the oven forward to slide it out. - Be cautious of electrical cables and connections at the back.
7. Replace the Grill Element: Install the new grill element by connecting the wires to the corresponding terminals. Secure it with screws or clips.
8. Reassemble the Oven: Reverse the disassembly steps: - Slide the oven back into place and secure it. - Reattach the door, ensuring the hinges are locked properly. - Replace internal components like racks and trays.
9. Test the Oven: Reconnect the power supply, turn on the oven, and test the new grill element to ensure it works correctly.
If unsure, consult a qualified technician to avoid damage or safety risks.
Need help?
Do you have a question about the TO6A and is the answer not in the manual?
Questions and answers
How do you remove upper oven to replace the upper grill element
To remove the upper oven of a Kleenmaid TO6A for replacing the upper grill element, follow these steps:
1. Disconnect Power: Turn off the oven at the main power supply or unplug it to ensure safety.
2. Remove the Oven Door: Open the oven door fully, locate the hinges, and release the locking tabs. Lift the door gently to remove it.
3. Remove Internal Components: Take out any racks, trays, or other removable components from the oven.
4. Access the Grill Element: Locate the screws or clips securing the upper grill element inside the oven cavity. These are usually at the back or sides.
5. Disconnect the Element: Carefully unscrew or unclip the grill element. Pull it forward slightly to access the electrical connections. Note the wiring to ensure correct reassembly, then disconnect the wires.
6. Remove the Upper Oven (if required): If the upper oven needs removal for better access:
- Locate the screws securing the upper oven to the cabinet or support brackets.
- Unscrew and carefully pull the oven forward to slide it out.
- Be cautious of electrical cables and connections at the back.
7. Replace the Grill Element: Install the new grill element by connecting the wires to the corresponding terminals. Secure it with screws or clips.
8. Reassemble the Oven: Reverse the disassembly steps:
- Slide the oven back into place and secure it.
- Reattach the door, ensuring the hinges are locked properly.
- Replace internal components like racks and trays.
9. Test the Oven: Reconnect the power supply, turn on the oven, and test the new grill element to ensure it works correctly.
If unsure, consult a qualified technician to avoid damage or safety risks.
This answer is automatically generated