VTech ErisTerminal VSP735 User Manual page 18

Deskset Installation
To mount the phone on the wall (continued)
4. Plug one end of the Ethernet cable into the Ethernet port on the rear of the
deskset (marked by
5. If the deskset is not using power from a PoE-capable network router or
switch, connect a power adapter to the deskset power jack.
6. Align the upper wall mounting hole on the back of the phone with the upper
tab of the standard wall plate. Make sure the lower wall mounting hole on the
mounting bracket also aligns with the lower tab of the standard wall plate.
Push the phone down until it clicks securely in place.
7. Bundle the Ethernet cable and power adapter cord neatly with twist ties.
8. Plug the Ethernet cable into the router your console is connected to and the
power adapter into an electrical outlet not controlled by a wall switch if you
are not using PoE.
).
18