Opel Combo 2011 Manual page 126

126 Vehicle care
2. Install the wheel wrench ensuring
that it locates securely and
slacken each bolt by half a turn.
3. Ensure the jack is positioned
correctly with the vehicle jacking
points.
4. Set the jack to the necessary
height before positioning it directly
below the jacking point in
a manner that prevents it from
slipping. Position the jack arm so
that the jack claw grips the vertical
web in the recess.
The edge of the jack base must be
planted firmly and vertically in line
with the contact point. Rotate
handle until wheel is clear of the
ground.
Back to overview