Side Turn Signal Lights; Number Plate Light - Opel Combo 2011 Manual

110 Vehicle care
2. Detach plug connector from bulb
mounting.
3. Hold bulb housing from the
outside; slacken two retaining
nuts with the wheel bolt spanner
3 118 and unscrew by hand.
4. Detach bulb housing.
5. Press retaining lugs on bulb
mounting together and remove
bulb mounting
Bulbs from top to bottom:
Reverse light/brake light
Turn signal light
Reverse light
Rear fog light, may be only on one
side
6. Remove bulb from socket and
renew bulb.
7. Engage bulb holder in bulb
housing. Insert the bulb housing
into the vehicle body. Screw the
fixing nuts onto setscrews by
hand and tighten. Engage the
plug connector. Place the cover in
position and close.
After bulb replacement, check the tail
lights for proper functionality: switch
on the ignition, operate the brake,
switch on the sidelights.

Side turn signal lights

Have bulbs replaced by a workshop.

Number plate light

1. Unscrew both screws. Remove
lamp insert.
Back to overview