Table of Contents
Advertisement
AdonisC3_GBzenF3_FM.book Page 22 Wednesday, February 26, 2003 10:55 AM
Getting Started
Turning On the Power
A A A A
Press the operation switch to
1
make the On indicator go on.
Note
❒ If the power is not turned on
when the operation switch is
pressed, check the main power
switch is on. If off, turn it on.
Turning Off the Power
A A A A
Make sure that the exposure glass
cover or the ADF is in the right
position.
B B B B
Press the operation switch to
make the On indicator go off.
22
Note
❒ Even if you press the operation
switch, the indicator does not
go off and blinks in the follow-
ing cases:
• When the exposure glass
cover or the ADF is open.
• When communication is in
p r o g r e s s w i t h e x t e r n a l
equipment.
• When the hard disk is oper-
ating.
Turning Off the Main Power
ZCAS050E
Important
❒ Do not turn off the main power
switch when the On indicator is lit
or blinking. Failure to observe this
may result in damage to the hard
disk or memory.
❒ Pull out the power plug after you
turn off the main power switch.
Failure to observe this may result
in damage to the hard disk or
memory.
A A A A
Make sure that the On indicator is
off.
B B B B
Open the switch cover and turn
off the main power switch to
make the main power indicator
go off.
ZCAS050E
Advertisement
Table of Contents
