How Do I Use The Reset Button? And Which Parameter Will Be Reset By The Reset Button - ZyXEL Communications P-2024 Series Support Notes

P-2024 Support Notes

How do I use the reset button? And which parameter will be reset by the reset button?

Use a sharp pointed object to press the reset button located near the power connector. Press and hold down the
button for about five seconds to reset the device. All device settings, including the login password and IP
address, will be reset to the factory defaults.
The default IP address is 192.168.5.1 and the default login password is 1234.
What network interface does the new P-2024 series support?
The new P-2024 series comes with an auto MDX/MDIX 10/100M Ethernet LAN port to connect to computer(s)
or switch(es) on the LAN and one 10/100M Ethernet port to connect to the external cable/DSL modem on the
WAN.
Does the P-2024 support TFTP?
Yes. In addition to the direct console port connection, the P-2024 supports firmware upload and configuration
file uploading/download using TFTP (Trivial File Transfer Protocol) over LAN.
Does the P-2024 support TFTP over WAN?
Although TFTP also works over the WAN, it is not recommended because of potential data corruption error
while transferring files to the P-2024.
How can I upload data to outside Internet over the one-way cable?
Set up an alternate path for connection to the Internet (for example, a dialup connection). You can still receive
downstream packets from the Internet through the P-2024.
How fast is the DSL connection?
There are a number of factors that can affect the speed of your ADSL connection. The connection speed may
depend on how fast your computer handles data, how fast data can be transmitted between your computer and
the modem, how well the cable modem handles traffic during network congestion, or how much bandwidth is
provided by the ISP, etc.
31
All contents copyright (c) 2006 ZyXEL Communications Corporation.