ZyXEL Communications P-2024 Series Support Notes page 19

P-2024 Support Notes
After you have obtained the account information your ITSP provider provided, you can start configuring the
SIP account.
Step 1. Log into the web configurator on the P-2024. Open a web browser and enter the management IP address
(the default is 192.168.5.1) as the URL.
Step 2. A login screen displays. Enter the administrative login password (the default is 1234).
Step 3. In the main menu, click VoIP > SIP to display the SIP Settings screen. In the SIP Account drop-down
list box, select a SIP account you want to configure.
Step 4. Select Activate SIP Account to enable this account and set the account information (such as SIP number,
SIP local port, SIP server address, SIP server port, Register server port, Register server address, SIP service
domain) in the fields below. Your ISP should provide you with the account information.
Step 5. Under Authentication, enter the account user name and password exactly as given by your ISP.
Step 6. Under SIP Settings, select Send Caller ID if you want to send the caller ID. Otherwise, clear the check
box.
Step 7. You associate the SIP account to a specified phone port on the ZyXEL device. This allows you to set
which phone(s) to use (ring) when an incoming call is received. In the WEB GUI, click VoIP > Phone to
display the Analog Phone screen. Select a phone index number in the Phone Port Settings field and select which
SIP account to use in the Outgoing Call Use section.
19
All contents copyright (c) 2006 ZyXEL Communications Corporation.