Table of Contents
Advertisement
Follow the procedure below to update the device firmware via the web configurator.
a. Log into the web configurator.
b. In the navigation panel, click MAINTENANCE.
c. Click the F/W Upload tab.
d. Click Browse and locate the directory of the firmware you want to upload and click Upload.
e. A message displays indicating that the firmware is successfully updated and that the P-2024 will reboot.
How do I upgrade/back up the firmware using an FTP client program through the LAN?
You can use an FTP program to transfer files (firmware or configuration files) to or from the P-2024. Follow
the procedure below to upload the firmware to a device using FTP.
a. Use an FTP program to put the firmware file (rename as "ras＂) on the P-2024. After the file transfer
is complete, the P-2024 stores the uploaded firmware to its FLASH ROM and reboots.
Note: Do NOT turn off the device while the file transfer process is in progress. Doing so will damage
your device and render it useless. Wait until the system LED turns steady before accessing the device.
b. To backup your firmware, use the FTP client program to get the ｀ras＇ file from the P-2024.
How do I upload or back up the configuration file (the ROM file) via the web configurator?
You can upload a configuration file to restore the device to the previously saved configuration, or reset the
device to the factory defaults.
Follow the procedure below to upload a configuration file via the web configurator.
a. Log into the web configurator.
b. In the navigation panel, click MAINTENANCE.
c. Click the Configuration tab.
d. Click the Restore tab and click Browse o locate the directory of the configuration file you want to
upload.
e. Click Upload.
Follow the procedure below to back up the configuration file from the device via the web configurator.
a. Log on into the web configurator.
All contents copyright (c) 2006 ZyXEL Communications Corporation.
P-2024 Support Notes
25
Advertisement
Table of Contents
