Table of Contents
Advertisement
LAN Connection and setting: When using DHCP server
6) After displaying the setting screen, confirm the
Media Player name (player Name).
To change the name, click the Change Player Name
button, input the name using 15 or less one-byte
characters starting with an alphabet, then click the
"Submit" button. (Do not use symbols or spaces.)
Keep a memo of the Media Player name.
7) Close Internet Explorer.
CAUTION:
Set it so that it is not the same as other Media Players.
It does not differentiate between uppercase and lowercase alphabets.
NOTE:
The default setting value of the Media Player name is DS34XXXXXX.
XXXXXX is the last 6 digits of the MAC address of the Media Player.
The MAC address can be confirmed in the "MAC" of the "NETWORK" of the OSD.
Example
In the case of MAC: 0050418000e9, the Media Player name is DS348000e9.
It can be used without changing the name.
3. Authoring software panel registration
Click the panel setting wizard in the "Panel Control" menu of the
Authoring Software, and startup the wizard.
1 Distribution list name setting
If no changes are necessary, click "Next."
2 Set to LAN (DHCP) in the connection type setting.
3 Input the set Media Player name.
4 ~ 6 Conduct the following settings as required, then click "Next."
7 Confirm the setting details and click "Complete."
Conduct 1-7 for all Media Players.
Reconfirm the setting details on the "Panel Control" menu.
The setting is complete.
NOTE:
The above setting can be changed in the "Panel Property" of the "Panel Control".
19
<Using LAN>
(continued1)
Media Player name on the setting screen
Change Media Player Name
Startup button of the panel setting of the
authoring software
Media Player name setting
Example: Register two Media Players
Advertisement
Table of Contents
