Nokia 3110c User Manual page 45

calls may be possible to the official emergency number
programmed into your device.
Select Menu Settings
> >
following options:
PIN code request or UPIN code request
•
the device to ask for your PIN or UPIN code every time
the device is switched on. Some SIM cards do not
allow the code request to be turned off.
PIN2 code request — to select whether the PIN2
•
code is required when using a specific device feature
which is protected by the PIN2 code. Some SIM cards
do not allow the code request to be turned off.
Call barring service — to restrict incoming calls to
•
and outgoing calls from your device (network
service). A barring password is required.
Fixed dialling — to restrict your outgoing calls to
•
selected phone numbers if this function is supported
by your SIM card. When the fixed dialing is on, GPRS
connections are not possible except while sending
text messages over a GPRS connection. In this case,
the recipient's phone number and the message
center number must be included in the fixed dialing
list.
Security and from the
— to set
Closed user group — to specify a group of people
•
whom you can call and who can call you (network
service)
Security level — Select
•
ask for the security code whenever a new SIM card
is inserted into the device. If you select Memory, the
device asks for the security code when the SIM card
memory is selected, and you want to change the
memory in use.
Access codes — to change the security code, PIN
•
code, UPIN code, PIN2 code, or barring password
Code in use — to select whether the PIN code or
•
UPIN code should be active
Authority certificates
•
view the list of the authority or user certificates
downloaded into your device. See
"Certificates," p. 64.
Security module settings
•
module details, activate
change the module PIN and signing PIN. See "Access
codes," p. 9.
Phone to set the device to
or User certificates — to
— to view Security
Module PIN request, or
45