Table of Contents
Advertisement
This manual contains information that is important for the proper setup and maintenance of
your touchmonitor. Before setting up and powering on your new touchmonitor, read through
this manual, especially Chapter 2 (Installation), and Chapter 3 (Operation).
1 To reduce the risk of electric shock, follow all safety notices and never open the
touchmonitor case.
2 Turn off the product before cleaning.
3 Your new touchmonitor is equipped with a 3-wire, grounding power cord. The power cord
plug will only fit into a grounded outlet. Do not attempt to fit the plug into an outlet that has
not been configured for this purpose. Do not use a damaged power cord. Use only the power
cord that comes with your touchmonitor. Use of an unauthorized power cord may invalidate
your warranty.
4 The slots located on the sides and top of the touchmonitor case are for ventilation. Do not
block or insert anything inside the ventilation slots.
5 It is important that your touchmonitor remains dry. Do not pour liquid into or onto your
touchmonitor. If your touchmonitor becomes wet do not attempt to repair it yourself.
T
OUCHMONITOR
A P P E N D I X
B
S
AFETY
B-21
Advertisement
Table of Contents
