Installing The Serial Touch Driver For Ms-Dos And Windows 3.1 - Elo TouchSystems 1715L User Manual

Installing the Serial Touch Driver for Windows 3.1 and MS-DOS
You must have a DOS mouse driver (MOUSE.COM) installed for your mouse if you wish to
continue using your mouse along with your touchmonitor in DOS.
To install Windows 3.x and MS-DOS touch driver from Windows 98/95, follow the directions
below:
1 Insert the CD-ROM in your computer's CD-ROM drive.
2 From DOS, type d: and press the Enter key to select the CD-ROM (your CD-ROM drive
may be mapped to a different drive letter).
3 Type cd\elodos_w31 to change to the correct directory.
4 Type Install and press Enter to start the installation.
5 Calculate the touchscreen.
2-8