Conair MT140RBC User Manual

MUSTACHE TRIMMER
Model MT140RBC
Trimmer Blade
On/Off Switch
Mustache Comb

TO OPERATE TRIMMER

1. To insert battery, remove compartment cover
by turning bottom piece of trimmer to the left,
then pulling straight down. Insert one AA battery
included, positive end up as indicated in Fig. 1. If
you are not going to use the unit for a long
period of time, or if the battery is dead, remove
the battery from the unit. This will increase the
life of your trimmer.
2. After inserting battery, close battery
compartment and turn unit to ON position
(bottom of trimmer).
Battery
Compartment
Battery
Compartment
Cover
3. To trim your mustache, use the
mustache comb to comb hair in the
direction of growth. Hold trimmer in an upright
position and bring the tip of the blade straight
into the mustache to trim.
4. To clean the trimmer, turn unit to OFF
position using your thumb press upwards
against blade. This will make it easy to clean as
head cover is on a hinge. Brush or blow hair
clippings from the cutter blade.
5. Then close head cover until you hear a
click.
Positive (+)
Terminal
Fig. 1