Download Print this page

Conair FS4RC Instruction Manual page 4

The complete facial spa

Advertisement

operatInG
InStructIonS
This appliance has a polarized plug (one blade
is wider than the other). As a safety feature, this
plug will fit in a polarized outlet only one way. If
the plug does not fit fully in the outlet, reverse
plug. If it still does not fit, contact a qualified
electrician. Do not attempt to defeat this safety
feature.
InStructIonS for your
perSonaL facIaL/
reSpIratory tHerapy
Before beginning, cleanse your face, following
your daily care routine. Lightly pat your favorite
moisturizer or eye cream around the eye area.
your facial Spa includes two detachable
cones:
Facial Mask: Use for facial cleansing.
Sinus Cone: Use for concentrated steam to
assist in respiratory therapy.
• Turn facial mask or sinus cone counterclock-
wise and lift away from base.
• Fill the water cylinder with warm tap water.
Pour water into the
reservoir and plug
it into a 120 volt AC
household outlet.
Press ON/OFF but-
ton to turn unit on.
The "ON" indicator
light will illuminate.
(See Figure 1)
• Place facial mask or
sinus cone over unit.
Lock
bumps on facial mask
or sinus cone with slots
over water reservoir
and turn clockwise.
(See Figure 2)
• Press "ON/OFF" button
to turn unit on.
• When the power is on, the ready indicator
light will flash for 3 minutes as the water is
preheating.
• When the indicator light has stopped flash-
ing and is steady, you may use the Facial
Spa. Unit will automatically shut off after 60
minutes.
• FOR A TIMeD TReATMeNT, the timer control
can be set from 3 to 15 minutes by rotating
the knob to desired time.
• Press the timer start button and the timer
indicator light will go on.
• The unit will shut off and a buzzer will sound
to indicate that preset time has expired.
• After completion of a timed treatment, you
may repeat above steps for another timed
treatment.
• Place The Complete Facial Spa™ on a dry,
level surface.
Figure 1
by
aligning
Figure 2

Advertisement

loading