Pioneer PRV-LX1 System Update page 8

The USB 2.0 HDD must be formatted before Backup,
Restore and Delete functions can be used.
♦
Optimize the UPS shutdown process during recording
If the LX1 receives a RS-232 UPS shut-down command
during recording, the LX1 stops recording, creates a non-
finalized disc, and shuts down. The disc can be treated as a
non-finalized disc and content can be added to it.
♦
Optimize Power-Off Process
If the PRV-LX1 Standby button is pressed during recording,
the unit stops recording then shuts down. The recorded
content on the disc will not be lost and it is possible to add
further content to the disc then finalize it for playback on
other DVD devices.
♦
Select Action for RS-422A Eject Command
User can choose to set the PRV-LX1 action when it receives
the EJECT RS-422A command: (1) automatically finalizes
the disc before ejecting it or (2) ejects a non-finalized disc.
♦
General updates
- Japanese Font Processor Fix
- Playback Sync Enable with DV Out
- Immediate Record/Preview after Encode Rate Change
- Thumbnail Images for Chapter Buttons remain the same
after Clip Trim
♦
Improvement of Disc Error Recovery During Record
If a DVD drive error occurs (possible shock or bad media)
when recording to the HDD and one or both DVD drives, the
recording continues on the HDD and to the error-free drive.
When the user stops recording an error message is
displayed. However, the recorded video material is retained
on both the HDD and the error-free drive. The DVD disc can
be treated as a non-finalized disc and content can be added
to it.
- 8 -