Nokia 6630 User Manual page 85

Tip! To lock the phone
manually, press
of commands opens.
Select Lock phone.
84
PIN2 code (4 to 8 digits) supplied with some SIM cards, is required to access some
functions in your phone.
Lock code (5 digits) can be used to lock the phone to avoid unauthorised use. The factory
setting for the lock code is 12345. To avoid unauthorised use of your phone, change the
lock code. Keep the new code secret and in a safe place separate from your phone.
PUK (Personal Unblocking Key) and PUK2 codes (8 digits) are required to change a
blocked PIN code or PIN2 code, respectively. If the codes are not supplied with the SIM
card, contact the operator whose SIM card is in your phone.
UPUK code may be supplied with the USIM card and is needed to unblock a UPIN code.
Wallet code is needed to use the wallet services. See 'Wallet', p. 65.
PIN code request
on. Deactivating the PIN code request may not be allowed by some SIM cards.
PIN code, PIN2 code, and
code. These codes can only include the numbers from 0 to 9.
Avoid using access codes similar to the emergency numbers to prevent accidental dialling
. A list of the emergency number.
Autolock period
automatically locked and can be used only if the correct lock code is entered. Enter a
number for the time-out in minutes, or select
To unlock the phone, enter the lock code.
Note: When the phone is locked, calls in Offline profile to certain emergency
numbers programmed into your phone are still possible.
Copyright © 2004 Nokia. All rights reserved.
– When active, the code is requested each time the phone is switched
Lock code – You can change the lock code, PIN code, and PIN2
– You can set an autolock period, a time-out after which the phone is
None to turn off the autolock period.