Call Settings - Nokia 6630 User Manual

Fig. 11 The screen saver
changes to show the
number of new
messages or missed
calls.
80
Orig. phone settings – You can reset some of the settings to their original values. To do
this, you need the lock code. See 'Security',
settings, the phone may take a longer time to power on. Documents and files are
unaffected.
Standby mode
You can assign keypad shortcuts for the different keypresses in the standby mode:
is the Left selection key, pressing
the same as Selection key. You cannot have a shortcut to an application that you have
installed.
Operator logo – This setting is visible only if you have received and saved an operator logo.
You can choose if you want the operator logo to show or not.
Display
Brightness – You can change the brightness of the display to lighter or darker. The
brighness of the display is automatically adjusted according to the environment.
Screen saver timeout – The screen saver is activated when the timeout period is over.
Light time-out – Select a timeout after which the backlight will be switched off.

Call settings

Send my caller ID (network service) – You can set your phone number to be displayed to
(Yes) or hidden from (No) the person to whom you are calling; or the value may be set by
your network operator or service provider when you make a subscription
Call waiting (network service) – If you have activated call waiting, the network will notify
you of a new incoming call while you have a call in progress. Select
the network to activate call waiting,
waiting, or Check status to check if the function is active or not.
Copyright © 2004 Nokia. All rights reserved.
'Phone and SIM', p. 84. After resetting the
is the same as Navigation key
Cancel to request the network to deactivate call
right, and is
(Set by network).
Activate to request