1-1. REAR COVER REMOVAL
3 Rear cover
1-3. CHASSIS ASSY REMOVAL
1i& 2 Make sure stopper is release & unscrew one screw
before taking out boards.
• Make sure all connector/bridge are fully inserted during
chassis installation.
1-5. D AND D3 BOARDS REMOVAL
2 D3 Board
SECTION 1
DISASSEMBLY
1 Eleven screws
(+BVTP 4 × 16)
2 One screw
(+BVTP 3 × 12)
One stopper
2
1
One stopper
3 One screw
(+BVTP 3 × 12)
1 D Board
1-2. SPEAKER REMOVAL
1 Two screws
(Washer Head)
(+P4x16)
1-4. SERVICE POSITION
1 Do not bend A1 board to avoid Bridge connector peel off.
2 Locate paper between A and D board to avoid heat sink touching.
3 Locate paper between A and C board to avoid heat sink touching.
• No need to connect earthing connector (F1 Board) during servicing.
1-6. F1 BOARD REMOVAL
– 5 –
3
2
1
1 Two screws
(+BVTP 3 × 12)
2 F1 Board
KV-DZ29M50
RM-GA002