Table of Contents
Advertisement
Trinitron Color TV
Operating Instructions
• Before operating the unit, please read this manual thoroughly and retain
it for future reference.
使用說明書
• 使用本電視機之前請先詳細閱讀此手冊﹐並妥善保存以備日後用作參考。
Panduan Pengendalian
• Sebelum mengendalikan unit, sila baca buku panduan ini dengan teliti
dan simpan untuk rujukan masa depan.
KV-DR34
KV-DR29
© 2002
Sony Corporation
4-088-512-11 (2)
GB
CT
MY
M69
Advertisement
Table of Contents
Related Manuals for Sony FD Trinitron WEGA KV-DR29
Summary of Contents for Sony FD Trinitron WEGA KV-DR29
- Page 1 • Before operating the unit, please read this manual thoroughly and retain it for future reference. 使用說明書 • 使用本電視機之前請先詳細閱讀此手冊﹐並妥善保存以備日後用作參考。 Panduan Pengendalian • Sebelum mengendalikan unit, sila baca buku panduan ini dengan teliti dan simpan untuk rujukan masa depan. KV-DR34 KV-DR29 © 2002 Sony Corporation 4-088-512-11 (2)
- Page 2 WARNING • Dangerously high voltages are present inside the TV. • TV operating voltage: 110 – 240 V AC. • Do not plug in the power cord until you have completed making all other connections; otherwise a minimum leakage current might flow through the antenna and other terminals to ground.
- Page 3 Do not place any objects on the TV. Install the TV on a stable TV stand and floor which can support the TV set weight. Ensure that the TV stand surface is flat and its area is larger than the bottom area of the TV.
-
Page 4: Securing The Tv
x Securing the TV To prevent the TV from falling, use the supplied screws, clamps and band to secure the TV. 3.8 mm screws Note • Use only the supplied screws. Use of other screws may damage the TV. 20 mm clamps Screw the band to the TV stand and to the provided hole at the rear of your TV. -
Page 5: Table Of Contents
Table of Contents Installation Getting Started ... 6 Setting up your TV (“INITIAL SETUP”) ... 7 Overview of Controls TV front and rear panels ... 8 Remote control ... 9 Advanced Operations Selecting the picture and sound modes ... 11 Viewing higher quality pictures with DRC-MF ... -
Page 6: Installation
Installation x Getting Started I N I T I A L S E T G AGE : L AN U ENG I L SH Installation Step 1 Insert the batteries (supplied) into the remote. Note • Do not use old or different types of batteries together. Step 2 Connect the antenna cable (not supplied) to 8 (antenna input) at the rear of the TV. -
Page 7: Setting Up Your Tv ("Initial Setup")
x Setting up your TV (“INITIAL SETUP”) When you turn on your TV for the first time, the “INITIAL SETUP” menu will appear. This menu allows you to change the menu language, adjust the picture position and preset the TV channels automatically. Press V or v to select the desired menu language (e.g.,”ENGLISH”), then press ENTER. -
Page 8: Overview Of Controls
Overview of Controls TV front and rear panels ENTER SELECT AUTO L(MONO) MENU PROGR PROGR TV front panel L(MONO) Button/Terminal 4 PROGR +/– 5 2 +/– 7 AUTO PROGR Menu operations 5 SELECT V/v 6 ENTER 8 MENU 9 t4 qs 8 qd T qf t1, t2, t3... -
Page 9: Remote Control
Remote control JUMP SOUND MENU PIP PROGR ENTER DRC-MF PIP PROGR SOUND WIDE SURROUND MODE MODE MODE PROGR RESET Button Function 1 ?/1 Turn off temporarily or turn on the TV. Display the TV input. 4 0 – 9, - Input numbers. - Page 10 continued JUMP SOUND MENU PIP PROGR ENTER DRC-MF PIP PROGR SOUND WIDE SURROUND MODE MODE MODE PROGR RESET Overview of Controls Button Function Menu operations MENU Display or cancel the menu. ENTER Confirm selected items. V, v, B, b Select and adjust items. Teletext operations (green label) Enlarge the Teletext display.
-
Page 11: Advanced Operations
Advanced Operations Selecting the picture and sound modes You can select picture and sound modes and adjust the setting to your preference in the “PERSONAL” option. JUMP SOUND MENU PIP PROGR ENTER DRC-MF PIP PROGR SOUND WIDE SURROUND MODE MODE MODE PIC MODE PROGR... -
Page 12: Viewing Higher Quality Pictures With Drc-Mf
MODE PROGR Advanced Operations Select MENU “DRC1250” WIDE MODE “DRC PROGRESSIVE” ) and “DRC-MF” are trademarks of Sony Select WIDE MODE “ON” “OFF” view super real (higher density) pictures. reduce jitter of any small areas or scanning lines (e.g., letters or the edge of objects) on the screen. -
Page 13: Watching Picture-In-Picture (Pip)
Watching Picture-in-Picture (PIP) With the PIP feature, you can display two different TV programs or video input at the same time by using the button. JUMP SOUND SOUND MENU PIP PROGR PIP PROGR +/ ENTER PIP PROGR – PIP PROGR MODE Notes •... -
Page 14: Selecting A Tv Program Using Pip
x Selecting a TV program using PIP You can select your desired TV program directly from the PIP sub screen by using PIP PROGR +/– buttons. SOUND PIP PROGR PIP PROGR +/ ENTER PIP PROGR –/ ENTER PIP PROGR SOUND SURROUND MODE MODE... -
Page 15: Setting The Timers
x Setting the timers You can set your TV to turn on and off automatically by using the WAKE UP and SLEEP timers respectively. JUMP SOUND MENU PIP PROGR ENTER DRC-MF PIP PROGR SOUND WIDE SURROUND MODE MODE MODE PROGR RESET Notes •... -
Page 16: Enjoying Stereo Or Bilingual Programs
x Enjoying stereo or bilingual programs You can enjoy stereo sound or bilingual programs of NICAM and A2 stereo systems by using the A/B button. JUMP SOUND MENU PIP PROGR ENTER DRC-MF PIP PROGR SOUND WIDE SURROUND MODE MODE MODE PROGR RESET Notes... -
Page 17: Viewing Teletext
x Viewing Teletext Some TV stations broadcast an information service called Teletext which allows you to receive various information, such as stock market reports and news. You can use the buttons on the remote to view Teletext. JUMP (red, SOUND green, yellow, MENU... -
Page 18: Menu Adjustment
Menu Adjustment x Introducing the menu system The MENU button lets you open a menu and change the settings of your TV. The following is an overview of the menu system. PICTURE icon SOUND icon PIP icon SETUP icon CH PRESET icon Menu level 1 Level 1 Level 2... - Page 19 PROGRAM” “TV SYS” * The BBE is manufactured by Sony Corporation under license from BBE Sound, Inc. It is covered by U.S. Patent No. 4,638,258 and No. 4,482,866. The word “BBE” and the BBE symbol are the trademarks of BBE Sound, Inc.
- Page 20 continued How to use the menu MENU PIP PROGR ENTER DRC-MF PIP PROGR SOUND WIDE SURROUND MODE MODE MODE PROGR RESET Other menu operations Adjust the setting value Move to the next/previous menu level Cancel the menu Tips • If you want to exit from Menu level 2 to Menu level 1, press V or v until the return icon ( is highlighted, then press ENTER.
-
Page 21: Changing The "Picture" Setting
x Changing the “PICTURE” setting The “PICTURE” menu allows you to adjust the picture settings. Press MENU. Make sure the “PICTURE” icon ( selected, then press ENTER. Press V or v to select the desired item (e.g., “DRC-MF”), then press ENTER. Select “DRC-MF”... - Page 22 continued Adjusting the “ADJUST” items under “PICTURE MODE” Press V or v to select the desired item (e.g.,“COLOR”), then press ENTER. Adjust the value according to the following table, then press ENTER. Press v or B to “PICTURE” decrease picture contrast. “COLOR”...
-
Page 23: Changing The "Sound" Setting
x Changing the “SOUND” setting The “SOUND” menu allows you to adjust the sound settings. Press MENU. Press V or v to select the “SOUND” icon ( ), then press ENTER. Press V or v to select the desired item (e.g., “SOUND MODE”), then press ENTER. - Page 24 continued Adjusting the “ADJUST” items under “SOUND MODE” Press V or v to select the desired item (e.g., “BALANCE”), then press ENTER. Adjust the value according to the following table, then press ENTER . Press v or B to “BASS” decrease the bass.
-
Page 25: Changing The Picture-In-Picture ("Pip") Setting
Changing the Picture-in-Picture (“PIP”) setting The “PIP” menu allows you to display a sub screen, change the sub screen position and exchange pictures between the main and sub screens. Press MENU. Press V or v to select the “PIP” icon ( then press ENTER. -
Page 26: Changing The "Setup" Setting
Changing the “SETUP” setting The “SETUP” menu allows you to change the menu language, adjust the picture position, reduce your TV power consumption, set up your program numbers and select the color system. Press MENU. Press V or v to select the “SETUP” icon ( ), then press ENTER. - Page 27 Adjusting each program number settings (“PROGRAM SETUP”) Select “PROGRAM SETUP” from the “SETUP” menu. Select “PR” and press ENTER. Press V or v to select the desired program number you want to adjust, then press ENTER. Press V or v to select the desired item (e.g., “SKIP”), then press ENTER.
-
Page 28: Changing The Channel Preset ("Ch Preset") Setting
x Changing the Channel Preset (“CH PRESET”) setting The “CH PRESET” menu allows you to preset channels automatically, manually preset channels and select the TV system. Press MENU. Press V or v to select the “CH PRESET” icon ), then press ENTER. Press V or v to select the desired item (e.g., “AUTO PROGRAM”), then press ENTER. -
Page 29: Presetting Channels Manually
Presetting channels manually After selecting “MANUAL PROGRAM”, select the program number to which you want to preset a channel. (1) Make sure “PR” is selected, then press ENTER. (2) Press V or v until the program number you want to preset (e.g., program number “10”) appears on the menu, then press ENTER. - Page 30 continued If you are not satisfied with the picture and sound quality, you may be able to improve them by using the “FINE” tuning feature. (1) Press V or v to select “FINE”, then press ENTER. (2) Press V or v to select “MANUAL”, then press ENTER.
-
Page 31: Additional Information
Additional Information x Connecting optional components Connecting to the video input terminal ( t ) S Video cable TV front panel (not supplied) Audio/Video cable Camcorder (not supplied) L(MONO) TV rear panel Video game equipment Antenna cable (not supplied) Audio/Video cable (not supplied) S Video cable (not supplied) - Page 32 continued Connecting a DVD player to the component video input terminal ( 1 Using an audio cable, connect R and L under TV to the LINE OUT, AUDIO R and L output connectors on your DVD player. 2 Using a component video cable, connect Y, P (component video input) on your TV to the COMPONENT VIDEO OUT Y, C and C output connectors on your DVD player.
-
Page 33: Troubleshooting
• Check the antenna cable and connection on the TV, VCR and at the wall. • Check the antenna setup. Contact a Sony dealer for advice. • Display the “CH PRESET” menu and select “MANUAL PROGRAM” to preset the channel again. - Page 34 • Press SOUND or • Do not use a hair dryer or other equipment near the TV. • Check the antenna setup. Contact a Sony dealer for advice. • Use a highly directional antenna. • Use the fine tuning (“FINE”) function.
- Page 35 • Press A/B until “AUTO” appears on the screen. • Check the antenna cable and connection on the TV, VCR and on the wall. • Check the antenna setup. Contact a Sony dealer for advice. — • Check the antenna cable and connection on the TV, VCR, and at the wall.
- Page 36 This does not indicate a turned on. malfunction. Additional Information Solutions • Count the number of times the 1 (standby) indicator flashes. Press ! (main power) to turn off your TV. Contact your nearest Sony service center. — — — Page – – –...
-
Page 37: Specifications
Picture tube Tube size (cm) Screen size (cm) Dimensions (w/h/d, mm) Mass (kg) Design and specifications are subject to change without notice. Sony Corporation KV-DR34M69 KV-DR29M69 Output: 1 Phono jacks; 1 Vp-p, 75 ohms Output: 1 Phono jacks; 500 mVrms...