Ricoh MP 1600L Operating Instructions Manual page 24

Placing custom size originals
When placing custom size originals in
the ADF or ARDF, specify the size of
the originals.
Note
❒ Paper that has a vertical length of
105–297 mm (4.2"–11.6") and a hor-
izontal length of 128–1260 mm
(5.1"–49.6") can be placed with this
function.
A
Select the paper tray using {U} or
{T}, and then press the {#} key.
B
Select [Custom Size] using {U} or
{T} key, and then press the {OK}
key.
Note
❒ When [Auto Detect] is selected,
the size of the placed original
will be detected automatically.
C
Enter the horizontal size of the
original using the number keys,
and then press the {OK} key.
Note
❒ If you make a mistake, press the
{Clear/Stop} key, and then enter
the value again.
D
Enter the vertical size of the origi-
nal using the number keys, and
then press the {OK} key.
The "
Programmed
pears with your set original size.
When the custom size originals
settings are registered,
appears on the top of copy display.
Note
❒ To cancel the size you have set,
press the {Clear Modes} key.
Placing Originals
" message ap-
19
1