Initial Settings; Setting The Date And Time - BenQ C1460 User Manual

Initial Settings

The language & date/time needs to be set if and when:
The camera is turned on for the first time.
The camera is turned on after leaving the camera without the battery for an
extended period of time.
1. Press the
ON/OFF
2. Press button to enter language setup. Select the displayed language with the
SET
/ / / buttons and press the
3. Select the date format with the
4. Select the item's field with the
time with the
5. After confirming all settings are correct, press the
Half-pressing the shutter button or pressing the
mode without saving the settings.

Setting the Date and Time

When the date and time information is not displayed on the LCD monitor, follow these
steps to set the correct date and time.
1. Press the
MENU
2. Select the [Setup] at the end of the Menu with the
/ buttons, and press the
3. Select [Date/Time] with the
press the button.
SET
4. Select the date format with the
and press the
SET
Select the item's field with the
and adjust the value for the date and time with
the / buttons.
The time is displayed in 24-hour format.
After confirming all settings are correct, press
the button.
SET
5. To exit from the [Setup] menu, press the
button.
button to turn the power on.
/
/
/ buttons.
button.
button.
SET
/
button.
button.
SET
buttons, and press the
buttons and adjust the value for the date and
button.
SET
MENU
buttons, and
/ buttons,
/ buttons
MENU
MENU
MENU
button.
SET
button will enter capture
SET
2011 01
SET
01
EN-13