Table of Contents
Advertisement
Alarm buttons and indicators
The system has two alarms, Alarm 1 and Alarm 2.
Each alarm can be set for:
• Time
• Volume
• Wake-up source: buzzer, radio, or CD
Using the Alarm buttons
Using the Alarm buttons on the bottom of the remote you can
setup and operate each alarm:
Press to turn
Alarm 1 on or off.
1.
2.
3.
Press to turn
Alarm 2 on or off.
Alarm status indicators
The upper right-hand corner of the display shows the alarm status
indicators if the alarm is set.
Example with Alarm 1 and 2 set:
Alarm 1
Alarm 2
Setting the alarms
You can choose the settings for each alarm by activating the Alarm
Setup mode and displaying the settings for each alarm.
To setup Alarm 1 or 2:
1.
Press Alarm Setup
The alarm number and time start flashing (A) and after a
moment, the current Alarm 1 settings are displayed (B).
A
B
2.
Using the Time buttons, set the alarm time.
Press to activate the Alarm Setup
mode and view Alarm 1 settings.
Press again to view Alarm 2 settings.
Press again to exit the Alarm Setup
mode.
Alarm 1 time
AM
PM
AM
PM
Alarm 2 time
.
Setting and Using the Alarms
3.
Select your wake-up source:
• BUZZER
is the factory alarm setting.
• Press
to choose a radio station.
• Press
to choose a track.
4.
Press
or
wake-up source.
5.
Press
to enter the Alarm 2 setup mode.
Repeat Steps 2-4 to set up Alarm 2.
6.
Press
again to exit the Alarm Setup mode.
The alarm you set is turned on and the alarm time displays:
Using the alarms
Turning an alarm on or off
Press
or
to turn the selected alarm on or off.
When an alarm is turned on, the alarm number and time appear in
the upper right corner of the display.
Snoozing an alarm
Tap the touch pad ,
SNOOZE is displayed for the duration of the selected snooze time
and then the alarm sounds again.
The snooze time is set at the factory to 10 minutes. To change the
snooze time, see page 14.
Stop and reset a sounding alarm
Press
.
Reset a snoozed alarm for the next day
After snoozing the alarm, place your hand on the touch pad again
and hold it there for at least 2 seconds, or press Stop Alarm.
to set the volume level of the selected
Alarm number
and time
Alarm number
and time
®
or press
on the remote.
English - 11
Hide quick links:
Advertisement
Table of Contents
