Cd Play Modes; Setting And Using The Alarms; Alarm Buttons And Indicators; Using The Alarm Buttons - Bose Wave SoundTouch Owner's Manual

Setting and Using the Alarms

CD Play Modes

While a CD is playing, you can change the way it is played.
Press Play Mode repeatedly until the play mode you want
appears:
Mode CD MP3
NORMAL PLAY  
SHUFFLE DISC  
SHUFFLE RPT 
REPEAT DISC  
REPEAT TRACK  
SHUFFLE FLDR 
SHUF RPT FDR

SHUFF RPT CD 
REPEAT FOLDR 
Note: The play mode returns to NORMAL PLAY whenever a CD
is inserted.

Alarm buttons and indicators

The system has two independent alarms, Alarm 1 and Alarm 2.
Each alarm can be set for:
• Time
• Wake-up source: buzzer, radio, CD or SoundTouch
• Volume
16 - English
Description
Plays tracks once in sequential
order.
Plays all tracks once in random
order.
Repeats all tracks in a random
order that changes each time the
disc is repeated.
Repeats the disc from the begin-
ning after the last track is played.
Repeats the selected track con-
tinuously.
Plays all tracks in the selected
folder in
random order (MP3 only).
Repeats all tracks in the
selected folder in random order
(MP3 only) that changes each time
the folder is repeated.
Repeats all tracks on a disc in a
random order that changes each
time the disc is repeated.
Repeats all tracks in a folder in
order (MP3 only).
™

Using the Alarm buttons

Using the Alarm buttons on the bottom of the remote you can
setup and operate each alarm:
Press to turn
Alarm 1 on or off.
1.
2.
3.
Press to turn
Alarm 2 on or off.

Alarm status indicators

The upper right-hand corner of the display shows the alarm status
indicators if the alarm is set.
Example with Alarm 1 and 2 set:
Alarm 1
Alarm 2
Press to activate the Alarm Setup
mode and view Alarm 1 settings.
Press again to view Alarm 2 settings.
Press again to exit the Alarm Setup
mode.
Alarm 1 time
AM
PM
AM
PM
Alarm 2 time