Positioning Your Sc-T46 - ViewSonic SC-T46 User Manual

Win7 pro thin client

Hide thumbs Also See for SC-T46:

Table of Contents

Setting Up Your SC-T46

Positioning Your SC-T46

2.1 Positioning Your SC-T46

Mount it on the back of a monitor using a VESA mount kit.

•

Mounting with Another VESA Bracket (SC-T46 (with WiFi))

In case that your SC-T46 uses a non-standard stand with the wireless module (SC-T46 (with WiFi)), a different VESA

bracket will be provided for you to mount your SC-T46 (with WiFi) on the back of a monitor.

To mount your SC-T46 (with WiFi), follow the steps below:

1. Align two mount holes on the VESA bracket with two mount holes on your SC-T46 (with WiFi), and then

secure the bracket to your SC-T46 (with WiFi) with two (2) screws as shown below.

2. Align the mount holes on the VESA bracket with the mount holes on the monitor, and then secure the

bracket and SC-T46 (with WiFi) to the monitor with two (2) screws as shown. Ensure that your SC-T46 (with

WiFi) is located in the center of the monitor and the rear panel of your SC-T46 (with WiFi) is facing rightward

as shown below.

Have SC-T46 (with

WiFi)'s rear panel facing

rightward.

Table of Contents