FujiFilm X-T1 User Manual page 15

AF Mode (Version 4.00) AF Mode (Version 4.00)
X-T1 Owner's Manual: P 78
The options available for the AUTOFOCUS SET-
TING > AF MODE item in the shooting menu have
changed.
• r SINGLE POINT: The camera focuses on the sub-
ject in the selected focus point. Use for pin-point fo-
cus on a selected subject (P EN-7).
• y ZONE: The camera focuses on the subject in the
selected focus zone. Focus zones include multiple
focus points (5 × 3, 5 × 5, or 3 × 3), making it easier to
focus on subjects that are in motion (P EN-7).
• z WIDE/TRACKING: In focus mode C, the camera
tracks focus on the subject in the selected focus point
while the shutter-release button is pressed halfway. In
focus mode S, the camera automatically focuses on
high-contrast subjects; the areas in focus are shown
in the display. The camera may be unable to focus
on small objects or subjects that are moving rapidly
(P EN-8).
AF + MF Mode AF + MF Mode
X-T1 Owner's Manual: P 78
A AF + MF option has been added to the shooting
menu.
If ON is selected for AF + MF in the shooting menu
when AF-S (single AF) is selected for focus mode, fo-
cus can be adjusted manually by rotating the focus
ring while the shutter button is pressed halfway. Both
standard and focus peaking MF assist options are
supported. Lenses with a focus distance indicator
(the XF14mmF2.8 R and XF23mmF1.4 R) must be set
to manual focus mode (MF) before this option can be
used. Selecting MF disables the focus distance indica-
tor. Set the focus ring to the center of the focus dis-
tance indicator, as the camera may fail to focus if the
ring is set to infi nity or the minimum focus distance.
AF + MF Focus Zoom
■
When ON is selected for SCREEN SET-UP > FOCUS
CHECK in the setup menu and SINGLE POINT select-
ed for AF MODE, focus zoom can be used to zoom in
on the selected focus area. The zoom ratio is the same
as that selected in manual focus mode (from 2.5× to
6×) and can not be changed.
ENGLISH
Changes and Additions
EN-3