INSPECTION When the equipment is received, all items should be carefully checked against the bill of lading to insure all crates and cartons have been received. All units should be inspected for concealed damage by uncrating the units immediately. If any damage is found, it should be reported to the carrier at once, and a claim should be filed with the carrier.
The Ice Merchandiser utilizes a programmable controller to control the temperature and defrost settings. The controller, which is located on the facade of the unit, is factory set. Please see the default settings sheet and separate instructions that are included on the operation of this controller.
Page 4
MAINTENANCE SERVICE AND ANALYSIS GUIDE MALFUNCTION POSSIBLE CAUSE Compressor will not start - 1. Service cord unplugged no hum 2. Fuse blown or removed 3. Overload tripped 4. Control stuck open 5. Wiring incorrect Compressor will not start - 1. Improperly wired hums but trips on overload 2.