Related Manuals for Standex RGM23
Summary of Contents for Standex RGM23
- Page 1 GLASS DOOR REFRIGERATED MERCHANDISER Installation, Operation and Maintenance Instructions Models RGM23, RGM48 and RGM72...
-
Page 2: Table Of Contents
TABLE OF CONTENTS INTRODUCTION ................................3 STORE CONDITIONS ............................... 3 WARNING LABELS AND SAFETY INSTRUCTIONS ..................... 4 PRE-INSTALLATION INSTRUCTIONS ........................... 5 Inspection for Shipping Damage..........................5 INSTALLATION INSTRUCTIONS ............................ 5 Uncrating ..................................5 Shelving Installation ..............................5 Location ..................................5 Electrical Supply ................................. -
Page 3: Introduction
INTRODUCTION This manual contains important instructions for installing, using, and servicing a Refrigerated Merchandiser case. Read all these documents carefully before installing or servicing your equipment. STORE CONDITIONS The Refrigerated Merchandiser cases are designed to operate best in the controlled environment of an air- conditioned store. -
Page 4: Warning Labels And Safety Instructions
WARNING LABELS AND SAFETY INSTRUCTIONS This symbol is the safety-alert symbol. When you see this symbol on your cabinet or in this manual, be alert to the potential for personal injury or damage to your equipment. Be sure you understand all safety messages and always follow recommended precautions and safe operating practices. -
Page 5: Pre-Installation Instructions
PRE-INSTALLATION INSTRUCTIONS INSPECTION FOR SHIPPING DAMAGE Inspect all cartons and crates for damage as soon as they arrive. If damage is noted to shipping crates or cartons or if a shortage is found, note this on the bill of lading (all copies) prior to signing. The receiving party is responsible for filing all freight claims with the delivering truck line. -
Page 6: Initial Cleaning
Initial Cleaning Keep the equipment clean and sanitary so it will meet your local sanitation codes. Clean the cabinet with a mild detergent and water, then rinse to remove any residual manufacturing oils. Do not use any chlorine based cleaners on the stainless steel. -
Page 7: Doors/Hinges
Door Gaskets can easily be replaced without the use of tools. The gaskets are dart style so they can be pulled out of the groove in the door and replaced by pressing the new gasket back into the groove. Doors/Hinges Should a door become out of alignment with the unit it can be straightened out by loosening the screws that hold the hinges, straightening the door and retightening the hinge screws. -
Page 8: Parts List
PARTS LIST The table below gives replacement part numbers. Use this chart when ordering replacement parts for your cabinets. Always Advise Cabinet Model and Serial Number When Ordering Parts MODEL Part Description RGM23 RGM48 RGM72 Compressor (includes electricals) 161658 161659 161660 Compressor Electrical Kit (Overload,Relay, Capacitor,..) -
Page 9: Sale And Disposal
SALE AND DISPOSAL OWNER RESPONSIBILITY If you sell or give away your cabinet; you must make sure that all safety labels and the IOM Instructions are included with it. If you need replacement labels or manuals, contact the Customer Service Department and we will provide them at no charge. -
Page 10: Wiring Diagram
11/18 161744...